News

Contractor access to your equipment: four ways to grant it and when you need PAM (privileged access management)

News | 22.11.2026

In October 2026 someone remotely switched the refrigeration units of hundreds of French supermarkets to defrost. No sophisticated hack was needed: the control panels were reachable from the internet. In this issue of Softprom Breakdown: four ways to give a contractor access to your equipment, and when that calls for a PAM system.

What happened

The attackers found Danfoss and Copeland/Dixell refrigeration controllers exposed to the internet and used default passwords and ordinary administrator functions: they changed temperature settings and switched off the alarms. Estimates of the scale vary, from 250–350 to more than 700 supermarkets in France. In November a second wave reached stores in several more European countries.

On 5 November 2026 CISA, the FBI and three other US agencies issued a joint fact sheet for owners of such equipment. The advice is simple: take the controllers off the public internet, change default passwords, separate the equipment from the rest of the network. According to The Hacker News, some of the vulnerabilities in Danfoss controllers remain unpatched.

Why this is not only about fridges

The industry centre WaterISAC named three conditions that make such an attack possible: the equipment is visible from the internet, passwords are default or weak, and remote access is run by a third-party integrator. The same three conditions exist wherever an outside company services ventilation, point-of-sale systems, ATMs, video surveillance or servers.

So the question is not about fridges. The question is how exactly a contractor reaches your equipment and what you know about it.

Four ways to give a contractor access

Method / what the contractor can do What you see / when it is acceptable

Control panel exposed to the internet
Everything, and not only the contractor

Nothing
Never

VPN into your network
Reach the whole segment the VPN leads to

That they connected, but not what they did
As a temporary step, when the equipment sits in a separate segment

The equipment maker's cloud service
Work with their own equipment

Depends on the maker
When the equipment comes from one maker and its logs are enough for you

Privileged access gateway (PAM)
Reach only the assigned device and only for the time of the request

Who connected, when, and a recording of the whole session
When there are several contractors or an auditor asks who changed what

PAM (Privileged Access Management) is a class of solutions that controls who gets administrative access, when and to what, and keeps a record of the actions. Buyers often call it admin access control or a PAM system.

What to do this week

  • Make a list. Which equipment is serviced by outside companies and how exactly they connect.
  • Take control panels off the internet. Do not wait for a vendor update: for some models there may be none.
  • Change default passwords. And remove shared accounts: one person, one account.
  • Check the firmware version. Update where updates are still released.
  • Agree a new access method with the contractor. Do it before you close the old one, otherwise the very next maintenance visit will fail.

The first three steps cost nothing.

How Ukrposhta did it

At the SOC Day Ukraine conference the head of information security at Ukrposhta, the national postal operator, spoke about deploying PAM from Segura. The task was the same: external IT specialists with administrator rights worked in a blind spot. After the deployment their sessions are recorded, passwords are managed by the system, and the log of administrator actions covers the regulator's requirements.

Solutions available in Ukraine

For the contractor access task, five solutions are available in Ukraine through Softprom. The first one covers the access itself; the others separate the equipment and show what is happening to it.

  • Belden (industrial firewalls). Separates the equipment segment from the rest of the network.
  • LECS (network threat detection). Spots anomalies in the traffic of the equipment segment.
  • NetWitness (SIEM and network traffic analysis). Collects logs and traffic so that the SOC sees changes on the equipment.
  • Segura (PAM Core and Domum Remote Access). Gives a contractor access only to the assigned device for the time of the request and records the session.
  • Stellar Cyber (Open XDR). Brings alerts from different sources into one console.

An honest limit. PAM will not fix a controller that no longer receives updates. It removes the unnecessary paths to it and shows who did what.

When you do not need PAM. One site and one contractor: take the panel off the internet, change the passwords, give a VPN with two-factor authentication into a separate segment. That is enough.

Frequently asked questions

Safer than an exposed panel. But a VPN shows only the fact of a connection and usually opens a whole network segment, not a single device.

A system that all connections with administrator rights pass through. It grants access for a limited time, keeps the passwords itself and records the session.

The owner of the equipment. The contractor does the servicing, while access rules, passwords and logs are set by the customer's IT or security team.

With a single contractor, usually not. PAM makes sense when there are several outside providers or there are audit requirements for logs.

Send a request through the consultation form. Softprom engineers will clarify the list of equipment and select an integrator partner.

Sources

  • SecurityWeek: joint fact sheet by CISA, the FBI and other US agencies, 6 November 2026.
  • WaterISAC: overview of the attacks on Danfoss and Copeland controllers in Europe, 12 November 2026.
  • The Hacker News: unpatched vulnerabilities in Danfoss controllers, 16 November 2026.

About Softprom and this series. Softprom is a value-added IT distributor founded in 1999. The company operates in 33 countries across Central and Eastern Europe, the Caucasus and Central Asia and represents 120+ vendors, 90+ of them in cybersecurity.

This article is part of Softprom Breakdown, a weekly series by Softprom: one event of the week, what it means for your company and what to do about it.